Brass Radiator
Thread : G1/4″ x 2
Dimension (LxWxH): 278x120x29.6 MM
16 FPI 25 Micron Copper Fins
Features:
1. Easy to Install.
2. Cooling Performance is Optimized for Maximum.
3. Combine High Quality Copper Material.
4. High Durability Powder Coat in Black Color.
5. RoHS Compliant.
Thread: G1/4″ x 2
Dimension (LxWxH): 278x120x 29.6 MM
16 FPI 25 Micron Copper Fins
Included:
Screws x 1Set.
| Brand | Bitspower |
|---|---|
| Date First Available | 23-Jul-20 |
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° – Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend.
Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.
EK-Quantum Flow Indicator D-RGB is a premium flow indicator with addressable RGB implementation belonging to the Quantum Line. It visually represents the coolant flow rate, which is often hard to see with the naked eye.
This can be very useful to instantly see if your loop operation is nominal or there’s trouble with the pump or flow in some other area. Aside from that, it’s a very stylish cast acrylic piece covered by a nickel-plated aluminum cover.
It features three G1/4″ ports, all of which are female. It can be mounted mid tube run with two fittings or fastened to any G1/4″ port on a radiator, pump, or even a block via the use of a dual male-threaded extender. Any of the threads can be used as either inlet or outlet. The flow indicator features a unique impeller body with a closed center and sloped impeller wings which prevent air from being stuck inside the indicator.
This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.
EK-AF ALU Angled 45° G1/4 is a revolvable angled (45°) adapter fitting with G1/4″ threads
Adding adapters like these to your liquid cooled build makes tube routing much easier and more elegant at the same time
These rotary adapter fittings can rotate they have the base that gets screwed into G1/4 port and the top of the fitting can rotate 360°, full circle
