UPGRADED SSD HEATSINK:The M.2 NVMe heatsinks cooler has upgraded with 2 thermal pads with 1mm and 1.5mm thickness for single-sided and double-sided M.2 SSD.
HIGH QUALITY: Made by Aluminum alloy, the NVMe SSD Heatsinks cooling fin can be used for a long time.
EFFICIENT: Comprehensive heat dissipation, 5°C – 15°C cooling effect (Varies depending on the environments).
COMPATIBILITY: Universal Compatible with M.2 SSD 2280mm
USER FRIENDLY: The heatsink kit is easy to install. You can install it in less than 3min.
For M.2 2280 solid state drive
All-aluminum + anode sandblasting, with 45 ° inclined wind guide structure, more fit the chassis air duct, quickly take away the heat of SSD, mini size brings better compatibility
Diversion-type all-aluminum heat sink with built-in thermal conductive silicone pad, which conducts heat quickly and avoids overheating and slowing down the SSD.
The surface has been treated with anode sand blasting to prevent corrosion and rust, and it is not easy to be soiled.
No interference with PCI-E card slot equipment
Heatsink for M.2 SSD
OLED temperature display
All Aluminum alloy material, excellent heat dissipation performance
Professional air duct design
With turbine fan cooling
Heatsink for M.2 SSD
OLED temperature display
All Aluminum alloy material, excellent heat dissipation performance
Professional air duct design
With turbine fan cooling
Heatsink for M.2 SSD
OLED temperature display
All Aluminum alloy material, excellent heat dissipation performance
Professional air duct design
With turbine fan cooling
Supports 2280 Length M.2 SSD.
Low-Profile and Compact Design to Work Around Tight Spaces.
Adjustable Height Design for Both Single and Double-Sided M.2 SSDs.
Compatible with PS5 M.2 SSD Storage Expansion and PC.
Total Height of 10.5mm w/M.2 SSD Installed to fit in Tight Spaces.
Cross-Cut Aluminum Alloy Heat Sink for Optimal Heat Dissipation.
Quality Thermal Pads Included for Efficient Heat Transfer.
Adjustable Screw Installation with Base Plate for Secure Fit.
Lowers Temperature from up to 15 to 30 Degrees Celsius preventing overheating SSD from throttling.
The product is applicable to the M.2 solid-state hard disk of NVME/NGFF protocol, and is compatible with 22 × 80 size single/double sided M.2 SSD solid state hard disk.
Heat dissipation aluminum +pure copper heat pipe makes the heat dissipation effect better.
Double aluminum design provides large area passive heat dissipation performance.
Pure copper heat pipe provides better heat dissipation performance.
The product is applicable to the M.2 solid-state hard disk of NVME/NGFF protocol, and is compatible with 22 × 80 size single/double sided M.2 SSD solid state hard disk.
Lightweight design, can support the installation under the graphics card.
Aluminum for heat dissipation provides a larger area of heat dissipation performance.
Heat dissipation pipe provides better heat dissipation performance.
Compatibility support 22 × 80 size single/double sided M.2-NVME/NGFF solid state drive.
Heat dissipation area extend, passive heat dissipation performance.
Pure copper heat pipe, double to provide better heat dissipation performance.
Efficient Cooling System:It comes with three fans which can speed up the air circulation inside the PlayStation 5 console to achieve the purpose of heat dissipation and improve the console’s lifespan and performance.
Easy Installation: The PS5 cooling stand does not require any external tools, simply slide the hook into the top of the PS5 console and insert the USB connector.
2IN 1 USB Port: .Built-in USB port(1 male +1 female port), male input port for connecting with PS5 to start the cooling fan,with female output port,you can charge other device (like PS5 controller cooling stand etc) not for data transfer.
LED Light: Built-in blue led light ,it will be turned on automatically after connected with PS5, provide a nice highlighting color for your console.
ABS Material: Both the stand and the cooling fan are made of high-quality, light, durable, and heat-resistant ABS material.
The New Colossus: This heatsink really stands out: no doubt quite the conversation piece for your new build, but it also has height to help the heat pipes do their thing.
Easier than it looks: While intimidating, this heatsink is easy to install. Everything needed is included and the M.2 screw is even built-in – you just need to make the magic happen.
Pipe away the heat: The heatsink contains three copper heat pipes designed to quickly draw excess heat away from your drive. A cool drive means no throttling, ensuring consistent performance.
The Be-All and End-All: Our heatsink is compatible with both single- and double-sided M.2 2280 SSDs. The Sabrent M.2 2280 SSD Rocket Heatsink is the ultimate solution for your SSD heat management needs!
Stylish, rugged, and effective: The top of the heatsink is shaped to increase surface area, helping your cases airflow to work naturally. The heatsink itself is made of aluminum for resilience and a stylish look.
Samsung M393B1K73BHD-CF8 8GB PC3-8500 Ddr3-1066Mhz 4RX8 Rdimm Ecc
Premium M.2 NVMe 2280 SSD heat cooler
Double copper heat pipe for faster heat transfer
Multilayered aluminum alloy heat dissipation fins for doubled heat dissipation area
Intelligent PWM fan with high wind pressure for faster cooling and heat dissipation
Patented double-layered graphene heat dissipation structure developed by Team Group
PS4/PS5 SSD cooler
Pure Copper Heatsink: Pure Copper has good heat dissipation, it will reduce the overheating risk of your steam deck, improve the game experience.
Phase change and silicone thermal pads: the thermal pads can not only improve heat dissipation, but also can make the ssd surface flat, to aviod bumping up against the Shield cover.
SSD Heatsink Thermal Pads for Steam Deck: the Pure Copper Heatsink is sepcially designed for Steam Deck 2230 SSD ONLY.
Heatsink and full set opening tools: ssd heatsink and full set tools for removing back plate, include copper heatsink, thermal pads, Triangle Pry Tool, screwdriver and screws.
Package include: 1x Copper Heatsink, 2x Phase change thermal pads, 2x Silicone thermal pads,1x screwdriver, 1x Triangle Pry Tool, Screws.
SSD Heatsink Thermal Pads for Steam Deck: the Pure Copper Heatsink is sepcially designed for Steam Deck 2230 SSD ONLY.
Heatsink and full set opening tools: ssd heatsink and full set tools for removing back plate, include copper heatsink, thermal pads, Triangle Pry Tool, screwdriver and screws.
Pure Copper Heatsink: Pure Copper has good heat dissipation, it will reduce the overheating risk of your steam deck, improve the game experience.
Phase change and silicone thermal pads: the thermal pads can not only improve heat dissipation, but also can make the ssd surface flat, to aviod bumping up against the Shield cover.
Package include: 1x Copper Heatsink, 2x Phase change thermal pads, 2x Silicone thermal pads,1x screwdriver, 1x Triangle Pry Tool, Screws.
Great heat conduction to prevent your M.2 SSD from throttling or damage caused by overheating
Supports M.2 SSD up to 2280 size
Supports M.2 connector height less than 4mm on M.2 adapter or motherboard
Includes 2 thermal pads with 0.75mm and 1.75mm thickness for single-sides and double-sides M.2 SSD
Easy installation
M.2 SSD heatsink adopts a design of 4 heat pipes, the heat pipe size is 5mm
Full electroplating reflow soldering process
Built-in 3010 size small fan with a speed of 3500-6000RPM
Designed for the high heat generation characteristics of PCIe 5.0 SSD
SpecificationsSize: 75*22.7*11.7mm, body material: aluminum alloy + 8mm pure copper heat pipe, color: silver gray
Specially Designed for M.2 2280 SSD Cooler
Powerful and Silent High Speed 20mm Micro Fan
1 x Ø6 mm High-performance Copper Heat Pipe
Integrated Molding High Quality Aluminum Heatsink
Stainless Steel Reinforced Backplate
High Speed Active Cooling
Even Heat Distribution
Maximized Cooling Efficiency
Tiny Yet Powerful
Designed for desktop computers
Compatible with Single/Double sided M.2 NVMe 2280 SSD ONLY
USB3.1 Harddisk Box with USB3.0 To Type-C Cable 2.5in Hard Drive Enclosure Driver-free LED Indicator for SATA 1/2/3 HDD Or SSD
Convert M.2 NVMe (PCIe Gen3 x4) module into a U.2 (SFF-8639) 2.5″ SSD factor with 9.5mm thickness; Same standard size, U.2 interface location, and mounting hole locations as U.2 drive
Converter design to fit any U.2 backplanes that enable mounting U.2 2.5″ SSD and Mobile Rack; Whole Aluminum case for excellent heat dissipation; Web like fin and use of thermal pad for heat management
Support hot-swapping (U.2 host controller must support hot-swapping); Support M.2 NVMe length of 2280, 2260, 2242, and 2230
8 mounting holes, 4 on the bottom, two on each side like Standard U.2 2.5″ SSD form factor; No drivers required, Multi-OS compatibility: Windows, OS X, Linux
Please note: U.2 is NOT SATA and is not plug or compatible with SATA.
Design for Windows OS (10/11) Desktop/tower system only with U.2 port, OS X 10.10 or greater system only with U.2 port, not compatible with phone; No drivers required, Plug and Ready ;Connectivity technology: external U.2 (SFF-8639)