*****a16012800ux0575 Aluminium Heatsink Heat Sink Radiator Fin 25x25x10 mm 10pcs Silver Tone Pack of 10

***** Best Quality Guranteed.
*****PREMIUM QUALITY AND GOOD THERMAL CONDUCTIVITY: This Heatsink is made of high-grade quality aluminum material, which extneds longer service and offers good thermal conductivity
*****16 PCS FINS OFFER MAXIMIZE CONTACTING AREA: Maximize surface area Designed in contact with the cooling air. The 16 pcs fins increase the area of the board and thus provide for greater heat transfer
*****WIDELY APPLICATIONS: This multiple Heat Sink Cooling fins has widely applications, which can be widely used for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc
*****Widely use for computer, Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET, SCR etc.OFFERS BETTER AND FASTER HEAT DISSIPATING: This Aluminum Heat Sink is designed to reduce the risk of hardware failure due to overheating, which ensures a safety working environment for you
*****ATTENTION: Please make sure that the size of the heat sink fits tha

Brand Arctic ,
Model ACFRE00115A

Compatibility

AMD Socket: AM4,

If you encounter problems with AM4 mounting, please check our FAQ,

RAM free space: unlimited,

Promise: 6 years,

Heatsink

Heatpipes: 4,

Fin material: Aluminium,

Number of fins: 54,

Fin thickness: 0.4 mm,

Thermal compound: MX-5 (0.8 g),

Fan

Fan size: 120 mm,

Speed: 200-1700 RPM,

Fan bearing: Fluid Dynamic Bearing,

Noise level: 0.35 Sone,

Current: 0.11 A/12 V,

Connection: 4-Pin,

Cable: 200 mm fan cable, black,

Size & Weight

Width: 133 mm,

Length: 91 mm,

Height: 158.5 mm,

Weight: 734 g,

Arctic Silver 5 3.5g is Non-electrically conductive. Will not separate, run, migrate, or bleed

Vapor Chamber Base with AluminumStacked Fin

Dual tower CPU cooler with dual fans and 6 copper heat-pipes ensuring the best thermal conducting efficiency
Fin offset design eliminates interference between memory modules and CPU cooler on LGA1200 motherboards
9 bladed high performance 120mm PWM controlled fans, with fan speed range of 0~1850 RPM
Each fan includes 8 ARGB LEDs which can be controlled by ARGB controllers or capable motherboards
Anti-vibrational rubber pads included for additional noise dampening
Spring screws mounting design with long screw driver included for firm and straight forward installation for both Intel and AMD platforms

Aluminum Stacked fin soldered on Copper base with 4x Heat Pipes embedded

At Duty Cycle 0~20%: 1000 RPM At Duty Cycle 50%: 2500 RPM At Duty Cycle 100%: 4500 RPM
At Duty Cycle 0~20%: 10.12 CFM At Duty Cycle 50%: 25.30 CFM At Duty Cycle 100%: 45.56 CFM
Copper Base & Aluminum Fins with Heatpipes embedded

Copper1100 Stacked Fin Heatsink with Vapor Chamber Base

5500 RPM
4.57 CFM
Copper

CPU Support: Intel
CPU Socket: LGA 7529
Screw Type: #8-32
Installation Torque: 8 in-lb
Solution: 2U and Up
Dimensions: 132.5 x 97.8 x 67 mm

CPU Support: Intel Granite Rapid AP
CPU Socket: LGA 7529
Screw Type: #8-32
Installation Torque: 8 in-lb
Solution: 2U Server and Up
Dimensions: 126.8 x 97.8 x 64.0 mm
Weight: 650 g
Material: Aluminum Fin with Heat Pipe
Thermal Grease: Shin-Etsu X23-8079-2 Pre-Printed
Life – Continuous operating under normal temperature (40 °C or 104 °F): 70,000 Hours

Supports AMD Socket sWRX8, sTRX4, TR4, SP3
Supports up to 225W TDP
Copper Heatsink with Vapor Chamber Base
8600 RPM Blower Fan, 26.25 CFM at Full Duty Cycle
Recommended for 1U Server and up

Supports Intel Socket FCLGA 3647 Narrow ILM
4-pin PWM Blower, Copper Heatsink with Vapor Chamber Base
Supports up to 205 Watts Heat Dissapation
Recommended for 1U Server and up

5000 RPM

Supports AMD Genoa Processors, Socket SP5
Copper Vapor Chamber and Fin Stack
Supports up to 260W TDP
Pre-applied Shin-Etsu 7762 Thermal Grease
Dimensions: 4.65″ x 3.64″ x 0.98″

CPU Support Intel
CPU Socket LGA1151 l LGA1155 l LGA1156
Solution 1U Server
Dimensions 83.0 x 81.0 x 27.8 mm

Supports Narrow ILM Socket LGA2011
Copper Vapor Chamber heatsink with Aluminum Stacked Fins
Convenient heat sink captive screw mounting
Shin-Etsu 7762 Thermal Grease pre-printed
Supports TDP 165 W

Supports Intel Socket FCLGA 4677
4-pin PWM Blower, Copper Heatsink and Copper Vapor Base
Supports up to 205 Watts Heat Dissapation
Recommended for 1U Server and up
Includes E1B Package Carrier

ULTIMATE THERMAL CONDUCTIVITY: With a thermal conductivity of 12W / mK, the GP-EXTREME offers first-class performance. SIMPLE APPLICATION: Thanks to its thermal dimensions of 120x20mm, the GP-EXTREME is easy to use. NON-ELECTRIC CONDUCTIVITY: The GP-EXTREME is not electrically conductive, non-corrosive, non-hardening and non-toxic. PERFECT SIZES: The GP EXTREME sizes are perfect for PCB surfaces, VGA cards, laptops, game consoles, microcontrollers, memory ICs and other SMD components. AVAILABILITY OF THE THIN: The GP-EXTREME is available in different thicknesses of 0.5mm, 1.0mm, 1.5mm, 2.0mm and 3.0mm.

dvance Technology: CPU Protector is designed using advanced technology and protects Intel 12th and 13th Gen processors from bending and keep them safe for long term use.
Top Quality Material: Our CPU bracket is made of top-notch Anodized Aluminium and provides extra safety for CPUs that may bend easily.
Easy to Install: The contact frame is easy to install and comes with all needed screws & screw driver and an installation guide. A video guide is also available for installation procedure.
Low Tempratures: Get rid of high tempratures with our contact frame. It helps reduce the CPU temparture by providing a good connection and even fit.
Specifications: 70.2x51x6.1mm, all aluminum. Compatible with Intel 12th/13th generation CPU, motherboard CPU slot for LGA1700 chipset for H610, B660, Z690 series.

Push-N-Snap Mounting Type, Only Fit for “LGA1366” CPU Cooling Fan
Incompatible for “Screw-Type” Mounting
Power Connection: 4Pin
For Intel LGA 1366 Processors, i7 965 970 975 980 980x 990 990x
Copper Core Heatsink up to TDP 150W