Features:
1. True Hi-Flow Design.
2. Hi-Quality Brass Material.
3. High Durability Nickel Finished In Black Sparkle Color
4. Hiding O-Ring Design.
5. Design For 90-Degree IG1/4″ Thread Application.
6. RoHS Compliant.
Thread : Inner G1/4″
Thread Length : 6MM
Thread No. : 2
***All Specification Will Be Changed Without Further Notice***
| Brand | Bitspower |
|---|---|
| Date First Available | 12-Nov-18 |
EK-AF ALU Angled 45° G1/4 is a revolvable angled (45°) adapter fitting with G1/4″ threads
Adding adapters like these to your liquid cooled build makes tube routing much easier and more elegant at the same time
These rotary adapter fittings can rotate they have the base that gets screwed into G1/4 port and the top of the fitting can rotate 360°, full circle
Premixed coolant for PC watercooling application
High quality concentrated pigments for intense, vivid and saturated colors
Low electrical conductivity
Biological growth inhibition
Fitment Reimagined – By rethinking the traditional compression fitting design, this new concept makes it easier than ever to install custom hard tube liquid-cooling loops, especially when working with tight spaces.
Four Built in O-rings – Maximum leak prevention, secure compression seal, and peace of mind.
Protection You Expect – Surface treated and a special coating finish provides increased durability and protection from corrosion.
Build It Your Way – Compatible with liquid cooling components that utilize G1/4 thread ports and 16mm OD PETG, Acrylic, and Copper hard tubing.
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° – Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend.
Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.
