Features:
1. Designed for MSI GTX 1080 Ti LIGHTNING Z.
2. Direct-Flow Design on Inlet/Outlet. 3. TOP Cover Made of Acrylic.
4. Block Base Made of C1100.
5. Bottom High Durability Nickel Finished in Shining Silver.
6. Compatible With Original Backplate.
7. RoHS Compliant.
Dimension ( LxWxH ): 273.4 *127* 20.8 MM (Out-Line)
Thread: G1/4″ x 4
LED Color: RGB
Included:
1. Fujipoly Thermal PAD Included. (Please Reference the Installation Guide. )
2. Stop Fitting x 2PCS.
3. Backup O-Ring x 1Set.
4. Mounting Screws/Accessories. 5. RGB LED x 1Set.
Compatibility: MSI GTX 1080 Ti LIGHTNING Z ***All Specification Will Be Changed Without Further Notice***
Bitspower VGA Block 1080TIML RGB-Nickel-Acrylic
$79.00
| Brand | Bitspower |
|---|---|
| Date First Available | 12-Nov-18 |
Related products
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° – Acrylic (6pcs)
$67.99 – $79.99
EK-Loop Hard Tube 16mm 0.8m Pre-Bent 90° – Acrylic (6pcs) is a 6-pack of 12/16mm (ID/OD) acrylic tubing bent to a 90-degree angle with a tubing length of 250mm and 550mm on either side of the bend.
Intended to help liquid cooling beginners, but also bring a quality of life improvement for liquid cooling enthusiasts by shortening the time and effort needed to bend the tubing and build the systems.
It comes in a length of 0.8m (800mm) which can be easily cut and shortened to an adequate length for any tubing run. It is mandatory to chamfer the edges of a freshly cut tube in order to prevent gasket (O-ring) damage.
EK-Quantum Flow Indicator D-RGB Nickel
$55.20
EK-Quantum Flow Indicator D-RGB is a premium flow indicator with addressable RGB implementation belonging to the Quantum Line. It visually represents the coolant flow rate, which is often hard to see with the naked eye.
This can be very useful to instantly see if your loop operation is nominal or there’s trouble with the pump or flow in some other area. Aside from that, it’s a very stylish cast acrylic piece covered by a nickel-plated aluminum cover.
It features three G1/4″ ports, all of which are female. It can be mounted mid tube run with two fittings or fastened to any G1/4″ port on a radiator, pump, or even a block via the use of a dual male-threaded extender. Any of the threads can be used as either inlet or outlet. The flow indicator features a unique impeller body with a closed center and sloped impeller wings which prevent air from being stuck inside the indicator.
This product is compatible with popular RGB sync technologies from all major motherboard manufacturers.
Corsair Hydro X Series XR7 480mm Water Cooling Radiator
$69.99 – $114.99
Quad 120mm fan mounts on either side are ready for your most ambitious custom cooling build.
54mm Radiator thickness delivers extreme cooling performance with high-airflow or low-noise fans.
A premium copper radiator core and 25 micron-thick cooling fins provide a high thermal transfer rate optimized for performance copper water blocks.
All inlet/outlet ports provide universal fitting compatibility.EK-AF ALU Angled 45° G1/4 – Black
$12.55
EK-AF ALU Angled 45° G1/4 is a revolvable angled (45°) adapter fitting with G1/4″ threads
Adding adapters like these to your liquid cooled build makes tube routing much easier and more elegant at the same time
These rotary adapter fittings can rotate they have the base that gets screwed into G1/4 port and the top of the fitting can rotate 360°, full circle
